This will prompt you with the default option of “do not unlock,” which you could pick by pressing the power button.Wait for the phone to enter the bootloader, and run fastboot flashing unlock.With adb installed, run adb reboot bootloader.Connect your device to your computer with a USB cable.Enable OEM unlocking and USB debugging in Developer settings.Ensure your phone is in developer mode.If you’ve ended up at my site, you probably already know this part, but briefly: You should be ready to go through the unlock process! Select the Google Pixel 3a device from the list and click to finish the wizard.Now click “Have Disk” and when prompted for the folder path, enter the path from step 1 above.You’ll be presented with a list of hardware types, choose “Show All Devices” and click Next.It may be tempting to “Search for drivers in this location,” but in my experience Windows will not pick up the new driver using that option in this case.Then choose “Let me pick from a list of available drivers on my computer.”.On the first step, choose “Browse my computer for drivers.”.Right-click Pixel 3a, and then click Update Driver.Locate Pixel 3a, likely under the Other devices or Portable Devices section.Open Device Manager (right-click on the Start button or just search from the Start Menu).Either way, note the location of the driver (likely c:\users\\AppData\Local\Android\Sdk\extras\google\usb_driver\amd64\extras\google\usb_driver\amd64 if you chose the SDK Manager route).Extract the zip if you chose that route.Obtain the driver, either by downloading the zip or using the Android Studio SDK Manager, both approaches described here:.It turns out that I needed the Google USB driver and had to install it in a way that made Windows 11 happy. Specifically, at the fastboot step, fastboot would hang reporting “”, even though I had followed all the steps. Trying to follow a number of guides, I was running into problems unlocking my Google Pixel 3a. Given that hint, I decided to just change the Speed and Duplex setting. The included theory was that a hardware problem prevents proper auto-negotiation when connected to non-2.5Gbps-supporting devices. The suggested fix was to download a specific driver from Intel, but the link was for Windows 10, and I’m on Windows 11. ROG Strix Z490-F Gaming, ethernet not working. I stumbled upon this solution after reading this Reddit post: I assume the problem and fix may be the same for other ethernet controllers listed here by Intel. I experienced this with an Intel I225-V Ethernet Controller on an ASUS ROG Strix Z490-I Gaming motherboard.Your connection should come up within seconds, assuming you were suffering the same problem. The default is Auto Negotiation, which is apparently the problem, combined with a hardware issue (see background below). Change the value to 1.0 Gbps Full Duplex (or whatever matches the device on the other end).Under the Advanced tab, select Speed
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |